Ada Shower Stall

An ADA shower can make life a disabled person is easier for he or she can enjoy a bathing experience safe and independent. Showers can often be slippery, especially if your tile surface is smooth. Install grab bars around your shower can help a person to keep his balance in the shower and avoid accidents. ADA (American Disabilities Act) provides new guidelines that manufacturers must follow when designing equipment bathroom for the disabled.

Choose the right support bar

You must purchase a support bar is strong enough to support your weight. You can choose from a variety of lengths of handrail, styles, designs and colors to suit your individual needs. Grab bars should be equipped so that you can easily hold on to them in the case of a slip. A grab bar mounted horizontally or at an angle of 45 degrees is said to provide optimum support. When you mount a grab bar, make sure the game wall is over 1.5 inches. It must also have a good size to fit your hand comfortably. A grab bar is usually stainless steel making it durable and easy to hold.

Get your tools ready

Mounting a grab bar is an easy task if you have the right set of tools and follow the instructions properly. You'll need an electronic stud finder, a drill reversible, a lock, a marker, screws, tape, a screwdriver, a screwdriver and the support bar.

Install bars

The first step would be to locate the studs. If you have a tiled wall and then find the amounts could be difficult. In such a case, you can use an electronic stud finder to determine where the studs are located. After locating the position, he scored with a tape and a pencil or a marker. The next step is to accurately position where you will drill the holes. This must be done carefully in order not to drill more holes than necessary.

Drill holes, ensure that you are using the correct type of drill and not to apply too much pressure can damage the surface. Finally, you need to meet the grab bars. Determine where you want them before screwing them in. You can apply some silicone sealant on the screws before mounting to keep the moisture in the wall. To tighten the screws, you can use a screwdriver or a screwdriver. It is preferable to use a regular screwdriver because it is less likely to cause damage and is quick and easy to use.

After mounting the grab bar test to see if you can hold the bar in practice, where access is good and if you can keep your balance to use. bars ADA requirements shall seize without a doubt a great convenience for the physically disabled and must be mounted on shower stalls to prevent accidents.