Can I use parts Fluidmaster toilet toilet on Mansfield? I've always been lucky with the Fluidmaster toilet but now I have a Mansfield and the rubber gasket always seems to wear. I want to know if I can change all the parts of a system Fluidmaster Mansfield?
Thank you
Yes you can, but. you must disconnect the tank from the bowl. to install the air discharge.
If you are not experienced to do so. you may have another problem.
eg. 1) drop tank or lid and crack.
Two) over tighten the bolt and crack.
3) Not completely seal and leak.
4) Scrape the bolt into the tank. and it will start to rust.
5) existing between the bolt is rusty. and you end up cutting off 1 because the bolt is already out of three.
6) bolts replacement is undesirable. you need a brass or stainless steel to prevent rust or corrosion. Most bolts replacement in Lowe's or Home Depot is made of chrome nuts Thin Regular wing and eventually the brass bolt. but because of two different metals. Galvanic corrosion will reduce the bolt in replacement glob mass of rust in a hurry.
7) the flush handle does not drain hose more. Jerry must Platform
If I were you. I go to a plumbing supplier and get the best part of Mansfield rubber. Change it in 30 seconds and must be done.
I own and maintain 14 units apt. 8 of them are Mansfield. I'm stupid mistake of changing any of the drain hose into the drain universal. Now, flush lever must be Jerry rigged.
fill tube can be changed to Fluidmaster.
Yes you can. Fluidmaster makes universal parts that fit all gravity flush (standard), WC. This includes the valves and filling valves. Just read the instructions for your type of toilet.
Peter is right contemptuous Fluidmaster makes your talk is 0.75
and changes in about 1 min.
Posted on May 14, 2010.
