Guide bathroom plumbing? Baths and basins The safest way, going back to a room is to use old equipment that is the same shape and size as the old equipment. Then all parts will be incorporated in the same positions and the existing plumbing and running waste can be used. But the possibility of planning a new bathroom from scratch so that it works better than the old one is usually too good to miss.
First, determine what improvements could be made - for example, a shower and a bidet to be a better idea than a bath? If the toilet part of the bathroom, or to split? Would two sinks reduce the load on the bathroom the morning? Or should additional pools will be certain rooms?
There is a wide range of bathroom equipment avail ¬ able. Some equipment is inexpensive and utilitarian, some are shameless luxury and some is designed to overcome specific problems such as shortage of space.
Once you have decided what equipment bathroom that you want, cut a small scale in terms of forms of individual elements from a piece of cardboard and put them on a wide bathroom. Leave enough space around each piece of equipment so it can be used properly - the elbow room on the side of the toilet and the knees before the toilet, for example. Add scale plans of these spaces for business cards. When two connections are unlikely to be used simultaneously - for example, a toilet and bidet areas of activity may overlap without the bathroom more difficult to use.
Do not forget to take into account things like windows and central heating radiator. The doors could be impeding rehung, or converted to sliding doors. Where possible, organize the equipment in a logical order - in addition to both sink and bidet toilet, for example. Keep in mind that it is better to conserve water and sewer work in the short and they may need to be concealed if they are not ugly. drains toilets are great and you may need to make room for them.
Baths
The baths are made of various materials. enameled cast iron, traditional material, is very heavy (it takes two people to move a large bathroom which is done), rigid and resistant to wear, but it has low resistance to chipping and expensive. Enameled steel, pressed has the same properties, but is much lighter, a little less rigid, and relatively cheap. The acrylic plastic or glass curb ¬ forced plastic to a bath which is very light, fairly cheap, and with good resistance to chipping. But the bath properly support needs, has low chemical resistance, and can melt if things warm as a cigarette butt in contact with her. The common forms of Bath are listed below.
Plain rectangular bath
Cheap, generally 700mm wide and 1700 mm, but other sizes are available.
rectangular bath with additional features
More expensive than the simple type. Different brands have different characteristics, usually handles to hold on when moving in the bath, slip-resistant base made up in the safest for the bath before passing, it is easier to climb and descend; taps must not be placed at the end, but on one side, or in a corner of nerve in the wall holes should not be taken at the end.
Corner bath
In general, a swimming area oval. In addition to looking different, it might be the answer to some problems of space because it takes less wallspace. Like other bathroom unusual, it is generally made of a plastic material - and may require a greater volume of water than a bath tradition ¬ ally shaped.
Double bath business for greater comfort while bathing with a friend of many different shapes are available.
Bathtub with seat
A small deep bathtub ¬ tion to sit rather than lie to, some are deep enough to allow the water to climb on the shoulders.
Basins
Most tanks are vitreous china that has good resistances.
Posted on May 5, 2010.
