Home    Complete Archive    RSS Feed    Contact    Search

Recent Posts
Shower Head Extender
Taf Toys Smart Mat
Gatco
Round Shower
Myson Premier
Cat Toilet Training
Dimplex Electric Towel Rails
Ceramic Toilet Roll Holder

My Friends
Home Tactic
Crickets Kitchen
Mission Yard
Curt Yard
Safety Freaks
Kitchen Forest
Children Sets
Dull Home
Home Big
Law Blog
Media Grids
Owners Mortgage

Marketplace

Toilet Bowls

Toilet BowlsInstallation / Repair toilet bowl

As the toilet is one of the most widely used medical items at home, it is often necessary to repair it from time to time. Two areas that need attention are: the toilet tank and bowl.

Repair toilet bowl

When the joint at the base of the bowl becomes defective because of age, he began to flee to his base. Before the repair, you must turn off the water supply of the cup and remove when the system is dry. After removal, clean the old joint and pipe. Subsequently, fixed rear of the bowl and seal it carefully and thoroughly. After all, if there are still leaks, most likely the porcelain of the toilet bowl was cracked. In this case, you can not repair and to replace the toilet.

Repairing the toilet tank

One of the most common toilet tank prevents water is flowing continuously. There may be a leak in the toilet tank. Test it by adding food coloring in the water of the toilet tank and see if the colored water rising in the toilet bowl. If so, this means that the toilet tank is leaking.

Before replacing parts, see if you can fix by adjusting the length of the wire lever or positioning of the ball toilet tank. However, if these steps do not help, you will need to replace parts in the toilet tank.

Install new toilet

Installing a new toilet requires a bit more work. First, remove the old valve and stop the use of Teflon tape to wrap around the pipe. Then screw the new valve stop and install the wax ring or a flexible ring after reversal of the toilet bowl.

You must now put the toilet in place, make sure it is properly in place. After that, screw the bolt in the floor base. Do not over tighten the screws that cracks may occur on the porcelain. Put a small amount of putty in the bolt caps to seal properly. Remember Teflon tape around the cock.

With bolts, nuts and washers, attach the toilet tank to the toilet before and tighten the hose connecting the toilet tank. Flip and grip inside the toilet tank should be connected to the chain. Now it is time to start the water and turn off the stopcock to let the water inside the toilet bowl.

Above all, remember to check for water leaks. With the right tools, time and patience, you can adjust your toilet bowl repair and installation problems. However, if you are short on time and do not want the hassle, you can always hire a professional plumber in Paris to help!

Posted on April 9, 2010.
Share |

Comments

There are no comments.

Leave a Comment

Your Name
Your Email
Comments
Human Check. Type 5003.